Free Form Lenses Explained


We have  done a few posts about free form lenses and discussed them regarding all types of progressive lens design comparisons. Free Form lens brands include Autograph by Shamir, Hoya Summit IQ, Kodak Unique, Zeiss GT2 3D and these are just a few. We have posted about how to sell digital lenses. But we realize not everybody in the optical lens business knows exactly what free form lenses are and I have to admit, I struggle explaining what they are to non-optical people when they ask me. I saw this article in VCPN by Jim Grootegoed and thought he did a great job of explaining free form lenses so here is an excerpt, click this link for the full version.

Photo courtesy Shamir

Free-form, digitally surfaced, cut-to-polish, and direct-to-surface are but a few of the terms being used to describe the same category of lenses. Basically, free-form consists of three separate but totally dependent parts:

  • a lens design
  • a software program
  • very specific processing equipment.

THE DESIGN – Free-form lens design may be categorized into three basic types:

  • Optimized free-form designs overcome optical aberrations and mechanical limitations of traditional surfacing. All lenses designed with digital free-form technology are effectively “optimized” because they can be precisely generated to a power of 0.01D.
  • Frametized lenses are modified to specific fitting, frame, or adjustment characteristics. Some account for frame measurements such as the ED, A, and B, along with the patient’s fitting height and monocular decentration.
  • Customized designs are created specifically to the prescription and individual viewing habits of the user. They consider position-of-wear measurements such as vertex distance, pantoscopic tilt, and face-form wrap.

Every free-form design is optimized and may or may not also be frametized and/or customized.

The design and manufacture of prescription ophthalmic lenses has been one of compromise between good optics, cosmetic considerations, machinery limitations, and inventory concerns.We, as an industry, have been providing compromised optics to our patients!

For multifocal lenses, additional compromises had to be made relative to intermediate and near vision placements. Insets were averaged. Segment lengths for PALs were also a matter of the manufacturer’s design, ranging initially from about 22mm to 24mm in length and now modified to be as short as 13mm. PALs caused additional distortions because the powers for distance, intermediate, and near were pushed all over the front surface of the lens.

Free-form lenses may be designed to correct, as much as is optically possible, these compromises, resulting in significantly improved vision. The software can calculate the “perfect” curve(s) and cylinder cross-curve(s) to 0.01D, the optimal corridor length based upon the fitting height and frame B measurements, and the near vision inset based upon add power and PD. The free-form machinery available today can produce those curves.


The key is the software that calculates the curves for the individual designs and drives the machinery to manufacture the lenses. The process starts with a theoretical design model, not unlike conventional PALs, using the front surface, the back surface, or a combination of both. The optimal curves are calculated for every possible prescribed power at thousands of points on the lens surface resulting in a “point file” that describes, in mathematical terms, the surface of the lens. Inasmuch as various lens materials all have a different index of refraction, the optimal curves must be calculated for every material too. This information is ultimately used to drive the production generator and polisher used to manufacture the lens.

Some lens designs place both the progressive design and the power parameters on the backside. Others use both the front and back surface for powers and progressive designs. Some require a distance measurement as well to approximate the distance from the back surface of the lens to the front surface of the cornea, but most do not. Others require the analysis and measurement of how a patient’s eyes move under reading conditions as part of the lens calculations. Whatever the requirements, the resultant lens can be significantly more accurate than any lens currently available on the market and provide the user with a new level of clarity.


Today’s free-form process can deliver a near finished quality surface off the cutting generator. Power tolerances of less than 0.01D are possible. The surface smoothness necessary off the generator for polishing is 1 micron…1/25,400th of an inch!

Jim Grootegoed is professional editor of Optical Lab Products.

Feb31 Mid 519


Comments are closed.